Monitoring the Toyota Tacoma maintenance indicator is crucial. Every user must learn about How To Reset Maintenance Light On A Toyota Tacoma. It may be found on the control panel and lets you know when your Tacoma requires maintenance. The Tacoma may, at times, encounter an issue that requires to be fixed, though, just like any other car.
How to reset maintenance light on Toyota Tacoma is one such issue. Press and hold the Odo/Trip odometer reset button for two seconds to reset the Tacoma maintenance indicator. Holding down the button allows you to restart the ignition of your car. If the light continues to be on, a mechanic should be called to deal with a more serious issue.
Let’s find out more about resetting the Toyota Tacoma maintenance light in simple and easy steps.
Key Takeaways:
- The model year of your car may typically be found on the registration, owner’s handbook, or insurance card if you don’t know it already.
- The maintenance light serves as a helpful reminder for the driver to do specific vehicle maintenance activities.
How To Reset Maintenance Lights On Toyota Tacoma?
In 2011 And Earlier Models:
In order to clear the maintenance light on a Toyota Tacoma model from 2011 or prior models, all you have to do is to follow these simple and easy steps:
Step 1: Put the ignition switch in the “Off” position.
Step 2: Now Push and hold the instrument panel’s trip meter reset button.
Step 3: While keeping the trip meter reset button down, flip the switch for ignition to the “On” setting (but do not turn the key in the ignition).
Step 4: Hold the trip meter reset button down for an additional 10 seconds or till the maintenance light starts flashing.
Step 5: After releasing the trip meter reset button, press and hold it once more right away.
Step 6: Maintain pressing the trip meter reset button throughout the approximate 5-second period necessary for the maintenance light to turn off.
Step 7: Disengage the reset button for the trip meter, then flip the switch for ignition to the “Off” mode.
There you have it! Your 2011 Toyota Tacoma (or previous models) should now have the maintenance light turned off. The maintenance light shouldn’t turn on when you put the ignition switch back in the “On” position.
In 2012 And Later Models:
Resetting Maintenance Lights On Toyota Tacoma 2012
In order to clear the maintenance light on a Toyota Tacoma model from 2012 or later, you can easily follow these steps and achieve your respected goal:
Step 1: Switch the ignition switch to the “Off” setting.
Step 2: Push and hold the instrument panel’s trip meter reset button.
Step 3: While keeping the trip meter reset button down, flip the ignition switch to the “On” mode (but do not turn the key in the ignition).
Step 4: Hold the trip meter reset button down for as long as it takes for the maintenance light to turn off (approximately 5 seconds).
Step 5: Disengage the reset button for the trip meter, then flip the switch for ignition to the “Off” setting.
There you have it! Your 2012 Toyota Tacoma (or a later model) should now have the maintenance light turned off. The maintenance light shouldn’t turn on when you put the ignition switch back in the “On” position.
Note: You might need to repeat these procedures if the maintenance light fails to go off after doing so, or you can look up further information in your owner’s handbook. It’s also crucial to keep in mind that turning off the maintenance indicator does not eliminate the necessity for routine maintenance and inspections, as advised by the manufacturer.
In 2018 – 2021 Models:
To reset the maintenance light on a 2018 – 2021 Toyota Tacomas, follow these steps:
Step 1: Verify that the distance indicated on the odometer is the total miles traveled and not one of the trip meters.
Step 2: Switch the ignition to the “Off” setting.
Step 3: Press and hold the instrument panel’s trip meter reset button.
Step 4: Flip the ignition switch to the “On” setting while holding down the trip meter reset button (but do not start the engine).
Step 5: Hold the trip meter reset button down for as long as it takes for the maintenance light to begin blinking, which ought to be about 10 seconds.
Step 6: After releasing the trip meter reset button, press and hold it once more right away.
Step 7: Continue to hold the trip meter reset button pressed for around 5 seconds or until the maintenance light goes off.
Step 8: Disengage the reset button for the trip meter, then switch the ignition to the “Off” setting.
This is all we have for it! Your 2018–2021 Toyota Tacoma’s maintenance indicator should now be turned off. The maintenance light shouldn’t turn on when you put the ignition switch back in the “On” position.
Crazy Facts:
- See the owner’s manual for your vehicle to find out your car’s precise service intervals and check whether the maintenance light has come on at the appropriate time.
- Driving your Toyota Tacoma is possible without too many problems without changing the maintenance light.
- To get the maximum performance out of your car, keep in consideration that engine oil must be changed at regular intervals because it is the engine’s lifeblood.
Conclusion:
Now you know how to reset maintenance light on Toyota Tacoma of every model in simple steps. Turn off your vehicle and then push and hold the ODO/Trip button to reset or turn off the Tacoma Reset Maintenance Light. Hold this button down while you restart the ignition of your car. Resetting the light is now necessary. If the light fails to turn off, your recent oil change probably did not include changing the oil filter. Make sure to check this out and make any necessary changes.