The fundamental capabilities of garbage disposal, like those of most kitchen appliances, are frequently ignored. That is until it quits working. There are various troubleshooting and repair methods you may carry out on your own before shelling out a sizable sum to pay a plumber to fix the problem.
You must be curious to know how to reset garbage disposal. You may not realize how intelligent your garbage disposal is. It is intended to shut off automatically if the disposal becomes blocked, gets too hot, or the motor experiences a problem. The small red reset icon on the bottom of your garbage disposal is the straightforward solution you weren’t aware of.
Today, we will give you a garbage disposal trick that could save money and get you out of a bind (literally).
Key Takeaways:
- Luckily, the reset button is easy to find if the noise from your garbage disposal necessitates it.
- For some devices, the reset button must be on the bottom side; for others, look underneath the company symbol or on the side of the device.
- Hit the reset button, restart the power, and evaluate your garbage disposal to check if it works after eliminating the clog’s source.
How To Reset A Garbage Disposal | Steps to Follow
A garbage disposal reset is a quick and easy procedure that only requires a few simple steps. In-depth instructions for resetting the garbage disposal are provided below:
- Disconnect the power source:
Ensure the appliance’s electrical source is shut off before resetting the garbage disposal. The unit’s power supply can be turned off by disconnecting it from the wall or flicking the circuit breaker that controls it.
- How to find the reset button
Typically, the waste disposal unit’s bottom is where you’ll find the reset button. It might be on the opposite side of the device, be red and black, and be there. Check the instruction manual for your particular model if you cannot locate the reset button.
- Tap the reset button:
When you have found it, press it strongly with your finger. When you touch the button, you ought to hear a faint click.
- Restart the power source:
After pushing the reset button, restart the power supply by replugging the device or switching on the circuit breaker.
- Testing the garbage disposal:
After the power is back on, turn the disposal on and pour some water to ensure it works. If the device is still not functioning, you might need to conduct additional troubleshooting or get advice from a specialist.
It is crucial to remember that restarting the garbage disposal should only be carried out if the appliance has switched off because of overload or a blockage. If the device keeps shutting off or malfunctioning, it can indicate an even greater problem that needs professional assistance.
How Often Does Your Garbage Disposal Need To Be Reset?
The garbage disposal is built to turn off on its own when it’s getting overwhelmed by a blockage, has been functioning for too long, or the motor is generally overheating. The integrated circuit breaker will trip, cutting off the power. This process is similar to what we used to disconnect the gas dryer, but it’s a little different.
A reset (or “overload”) button that is typically depressed will emerge when the built-in circuit trips. Reset buttons are frequently found at the bottom of garbage disposals, typically red (though they are not always). Most of the time, simply pressing the reset button gives the garbage disposal power again.
Ten Items You Never Want To Put In A Garbage Disposal
Here is the list of ten items you should avoid putting in your garbage disposal.
- Using grease, your pipes will be covered.
- Bones will continue spinning when the blades cut them.
- Celery’s fibrous fibers entangle themselves in the garbage disposal’s cutting edges.
- Coffee grounds also come on this list. When the oil in the coffee grounds cools, it becomes a gummy mess.
- When egg shells are crumbled, the resulting particles resemble sand and stick to grease.
- The fibers in corn husks become trapped in the blades.
- Again, artichokes are excessively fibrous.
- Fruit pits, which can jam disposal blades due to their extreme hardness.
- Potato peels, starchy veggies, and even pasta may be sticky.
- Your hand, as it does not need any more explanation.
Crazy Facts:
- Frequently stuck or overheated garbage disposals trip the overload protector.
- The overload protector can be reset easily and without any equipment.
- Never put your hand into the garbage disposal or use chemical drain cleaners.
FAQs:
Is resetting the garbage disposal safe?
When the overload protector, typically a tiny red button on the bottom of the disposal, is protruding, it is required to reset your garbage disposal. Whenever the garbage disposal is clogged or has overheated, this typically occurs.
How can I turn on my garbage disposal?
The small red reset option on the underside of your disposal is the straightforward remedy you probably weren’t aware of. Make sure the garbage disposal is switched off first. Look under the disposal for a red button. Press it back in if it has popped out by approximately a quarter of an inch, then attempt to run The Disposal.
Conclusion:
Now you know how to reset a garbage disposal in simple and easy steps. Moreover, also follow all directions so no further issue arises. Also, try to avoid putting a comprehensive list of items in your garbage disposal, as it can cause it to malfunction and stop working.