Although the firmware on the DualShock 4 doesn’t require updating, issues can still exist. So, you might need to acquire knowledge of how to reset a PS4 controller if you discover it isn’t functioning properly.
Does a PS4 controller have any abnormalities? Resetting the peripheral is a simple fix when the controller for the PlayStation 4 starts acting strangely. It is a straightforward procedure that won’t require you to acquire new hardware or have it repaired.
Resetting your PS4 controller can be necessary if it’s functioning strangely, randomly disconnecting, glowing white or blue, or otherwise acting strangely. In this article, we’ll explain how to do it correctly if you are facing this issue frequently.
Key Takeaways:
- Use a functional controller to navigate to Settings > Devices > Bluetooth Devices for a soft reset.
- Click the Options switch, then choose Forget Device after selecting the controller you wish to reset.
- Use a straightened clip to push the button within the little hole on the reverse side of the controller for a few seconds to perform a hard reset.
How To Reset A Ps4 Controller? Soft Reset
You’ll need a second DualShock 4 controller that is in good functioning order to traverse the subsequent steps in order to finish this kind of reset.
- Navigate to Settings. Then open Devices and then Bluetooth Devices on your PlayStation’s dashboard.
- From the list, pick your DualShock 4 controller that isn’t in use. The one without a green dot adjacent to it could be the one you’re going to choose.
- On your functioning controller, select Forget Device by pressing the Options button. This will get rid of the broken, inoperative controller from your PlayStation.
- To turn off your PS4, choose the Power button and then Turn off the PS4 by pressing the PS icon on your functioning controller.
- Connect the problematic controller to your PlayStation 4 via a USB cord after turning off your system fully, and then turn it back on.
- You can access your PS4 by pressing the PlayStation button on your broken controller.
How To Reset A Ps4 Controller? Hard Reset
It could be time to perform a complete reset on the controller if it’s still experiencing issues syncing with your PlayStation 4. Your controller will return to its initial manufacturing settings as a result but don’t worry. Your game save data will be safe. What you’ll need is as follows:
- A Bent Straight Pin Or Paper Clip
- A USB cable, micro
In general, the process of resetting your PS4 controller is simple to learn from there. Just carry out these actions.
- Switch off the PlayStation 4. Additionally, since the internet might occasionally interfere with how your controller is configured, you might wish to unplug it from the network.
- Flip the controller over after unplugging it.
- Put the controller on its back while employing your paper pin or clip to find the lowered reset button in a small opening next to the L2 button. Hold the button down for a minimum of 6 seconds.
- Let go of the reset button after a brief delay. Next, connect the Micro-USB cord to the controller.
- Select PS from the menu. The controller should be linked when the LED bar on it turns blue, at which point you may access your PlayStation 4 and start playing.
Why Won’t My Playstation 4 Controller Work?
Are you unsure how your DualShock playstation 4 remote control got disconnected? Our experts suggest the following factors as potential ones:
- Recently, the controller was connected to another device, such as an alternate PS4 or PC.
- The controller’s charge is either completely dead or on the verge of dying.
- The Bluetooth® connection between the controller and your PlayStation has been lost due to its distance.
- Your controller’s Micro-USB cord could be broken or unplugged.
- The Power Save settings on the PlayStation could have caused the controller to switch off.
- There could be a problem with or damage to the PlayStation button on the controller.
How Else Can You Proceed?
You might want to see it with a different PS4 or PC if your controller continues to be sluggish at this stage. It may be on Steam by just plugging a USB cord into a Windows PC. The issue, however, is with your console if no controller functions on your PS4 yet does on other platforms.
You could try using Safe Mode to reset the console to its default settings. You could also take it somewhere for repairs. If not, a technician should examine the controller to determine the cause of the hardware issue and fix it.
Crazy Facts:
- You don’t lose your games, stored game information, or any additional files on your system when you fully reset your PS4 controller. The only thing that is reset is the controller.
- Resetting the peripheral is a simple fix when the controller for the PlayStation 4 starts acting strangely.
- A small number of users may have severe PS4 controller issues as a result of hardware malfunction or failure. It’s not unusual for the PlayStation 4 controllers to pause functioning after being dropped or exposed to weather conditions like heat or moisture.
FAQs:
How can I resync the controller on my PS4?
Push the PlayStation button and the “Share” option on your PS4 controller for five seconds to sync it. Select the new controller with a different controller when it shows in the set of Bluetooth devices. After that, your PS4 and the latest controller will be synchronized.
Why does my PS4 controller behave strangely?
The drift on the PS4 controller can be caused by one of two issues: The analog stick needs cleaning. The potentiometer or analog stick is broken.
Conclusion:
Now you know how to reset a ps4 controller in simple and easy steps. It is totally up to you if you want to hard reset or soft reset it. Try resetting your modem or router if your controller still gives you trouble. Before you take this action, remind everyone in the house that you will lose Internet access.